 |
 |
 |
 |
 |
| |
EM3G |
|
|
|
 |
iBoard |
|
|
iBoard
is a FULL Linux® embedded core module in
the very tiny size (55x65 mm.) Its high performance
(100 MIPs) with low power consumption (1.5 watts)
and flexible module designed can be integrated
into the wide range of application. We provide
one build-in Ethernet combined with Linux®
stable TCP/IP networking that ideally suited
for Internet enabled solutions. Also, one or
two build-in USB host port provided for wide
variety of peripheral devices e.g. Camera, Hard
disk, USB Flash drive, USB to Ethernet adaptor,
USB to Serial adaptor, Bluetooth, Wireless LAN.

|
iBoard
DEV 1.0 |
|
|
iBoard DEV 1.0 (iBoard Development Board)
iBoard DEV คือ บอร์ดพัฒนาที่ออกแบบเพื่อการเรียนรู้และเข้าใจการทำงานของ
iBoard ที่มี CPU แบบMicrocontroller 32-bit ตระกูล
ETRAX ทั้งในภาค Hardware และ Software ได้เป็นอย่างดี
คุณสามารถทดลองต่อวงจรได้บน Proto Board พร้อมอุปกรณ์การทดลองต่างๆที่มีมาให้ครบถ้วน
เช่น Relay, LCD Character, LCD Graphic เป็นต้น
พร้อมกับ GPIO ที่มีให้แบบครบถ้วนทั้ง 40 GPIO
ตลอดจน Serial Port (RS232, RS485) และ USB Port
ที่พร้อมรองรับการเชื่อมต่อกับอุปกรณ์ภายนอก เพื่อช่วยให้คุณสามารถพัฒนา
Application ต่างๆได้อย่างรวดเร็วและถูกต้อง

|
 |
EM911®
Extreme II |
|
|
EM911® Extreme II
is one of the best innovations of designing
Wireless WAN Cellular Router with highest
performance in which that can install 2 cellular
modules simultaneously both GSM and CDMA Family.
The EM911®
Extreme II is able to support the connection
of the 2 modules via 3 SIM Card which is provided
by different mobile operator and an intellectual
design of iConneXt,
exclusive distributed by EMBES. iConneXt
is especially built with an ability to combine
Bandwidth of two connections from Wireless
WAN Cellular Router into very high speed one
connection.
|
 |
EM911®
mini |
|
|
The
EM911®
mini
is an industrial grade Wireless WAN cellular
routers, gateways and VPN appliances that provide
secure high-speed wireless communication to
any devices and remote sites. EM911® mini
can be used for reliable primary wireless WAN
network communication to equipment at remote
sites, as well as a backup for existing landline
communications. They are also ideally to be
use where wired networks (e.g. leased line,
frame relay, MPLS, ADSL, ISDN) are not available,
or where alternative network communications
are required.
|
|
|
 |
    |
 |
copyright
2005 Embes.com. All right reserved |
|
|
|
 |